Hyper Interlocking Nail for Tibial Bone Marc 2

Hyper Tibia Marc 2 Nailing System is intended to stabilise fractures of the proximal and distal tibia and the tibial shaft; open and closed tibial shaft fractures; certain pre-isthmic and post-isthmic fractures; and tibial mal-unions and non-unions
The use of cannulated Hyper Tibia Marc 2 Nail with large diameter offering more stability associated with the reamed technique is generally recommended for Pseudoarthrosis, tumors, malunions and nonunions.

Titanium alloy for improved mechanical and fatigue properties
Cannulated nails (from 8 mm to 11 mm) for reamed or unreamed techniques, enabling nail insertion over guide wire
All 2.0 mm or 3.0 mm ball-tipped guide wires may be removed through the nail and insertion handle assembly (no exchange tube required)

1. Advanced Nail Design:

- 8-degree proximal bending for seamless insertion.
- Minimizes fragment movement during application.

2. Locking Hole Design:

- Offers advanced proximal locking options –
  - Three innovative locking options, in combination with dual core locking screws, to increase the stability of the proximal fragment for proximal third fractures.
  - Two ML locking options enable primary compression or secondary controlled dynamization

- Offers advanced distal locking options –
- Distal oblique locking options to help prevent soft tissue damage and increase stability of distal fragment
- Two ML and one AP locking options for stability of distal fragment.